

HomeFAQSubmit TicketLogin

Categories

Report-IT (23)

Search Articles

How do I connect to my studio codec?

Before a connection can be made, you must first obtain the IP address of your studio codec. Please consult your BridgeIT/G3 manual for details on how to get this information from a Tieline codec, or contact your studio engineer. Once you have your codec address:

For Report-IT Lite/Live/Pro 2.3 or higher:

When Report-IT is first launched, you will be presented with the Configuration screen. From here touch the Codec option then go to step 2. If you are on the Report Live screen, there is no longer any need to go through the Configuration screen, you can press the blue detail disclosure button in the Codec section of the Screen (when not connected) instead:

Tap Codec and then Codec Address. (When using Report-IT Lite you will be able to go straight to the Codec Address field), you will be able to enter the IP address (or host name) of your studio codec using the on-screen keypad. When using Report-IT Live or Report-IT Live Professional, tap on the Codec item that appears after Contacts.
Navigate back to the Report Live screen once you have entered the address by tapping the navigation buttons in the top left.
If you are returned to the Record a Report or Manage Reports screen, then tap the Activity button in the top right-hand corner of the screen and tap to select Report Live.

Press the Connect button on the Report Live screen:

For Report-IT 2.2 or lower:

Open the Configuration screen in Report-IT. This will be displayed when Report-IT is first launched after installation or by pressing the Information button in the bottom-right hand corner of the Report Live screen.

Tap Codec. When using Report-IT Lite, you will be able to enter the IP address (or host name) of your studio codec using the on-screen keypad.
Tap the Configuration button at the top of the screen to return to the Configuration screen.
Tap the Done button in the top left-hand corner of the Configuration screen.
Tap the Activity button in the top right-hand corner of the screen and tap to select Report Live if this screen is not displayed.

Press the Connect button on the Report Live screen:

Save

Comments

Notify Me

Add to Favorites

Article ID: 10004

Article Created: 03-18-2010 13:15 PM

Last Modified: 06-14-2010 16:55 PM

How well did this article answer your question?

100% 75% 50% 25% 0%

Most Recently Viewed Articles

	How do I connect to my studio codec? This article explains how to go about connecting Report-IT to your Tieline Bridge-IT or G3 codec located at your studio....
	What version of Report-IT do I have? You may wish to know what version of Report-IT you have for a variety of reasons. This article provides the information as to how you can find out what version of Report-IT you currently have....
	What are the PPM meters displaying? The PPM meters shown on various screens in Report-IT provide an indication of the audio power for either Input, Return, or Playback. This article details what these are showing....
	What is Live Time? The most powerful and valuable feature of Report-IT is its ability to transmit live high quality audio using extremely low bandwidth with very low delay. This article describes how Live Time provides access to this technology....
	What TCP/UDP ports does Report-IT use and how do I change them? Report-IT uses both TCP and UDP ports for communications and streaming audio. This article explains what these ports are and provides important information for network administrators dealing with firewalls and NATs....
	Does Report-IT work on all iPhones, iPads, and iPods? This article discusses the compatibility of Report-IT on various Apple mobile devices. ...
	Does Unlimited Live Time in Report-IT Live Professional expire? Unlimited Live Time is a premium Live Time option that is only provided as part of Report-IT Live Professional. It is intended for frequent users of live broadcasting from Report-IT. This article explains how Unlimited Live Time is different to Pre-Paid Live Time when it comes to the circumstances that may cause expiry or extinguishing of Unlimited Live Time. ...
	Why can't I establish a connection to Report-IT from my Codec? Report-IT by design only allows connections for streaming to be established from Report-IT and not by the studio codec. This article explains why this approach has been taken....
	How do I configure my G3 or Bridge-IT for Report-IT? This article describes how to setup a G3 or BridgeIT codec to accept connections from Report-IT....
	Why do I need to purchase Live Time and what will it cost? This article outlines the unique live broadcast features of Tieline's Report-IT Live app and explains the In-Application purchasing process that delivers live transmission features not found other iPhone applications....