Recording a Report

When Report-IT Live is used to record audio, it makes use of whatever free memory is available on your iPhone. The maximum duration of a recording is entirely dependant upon how much memory you have available on your iPhone.

Automating the Recording of All Live Reports

It is possible to simultaneously record all reports and stream live audio after a live connection to a studio codec is established.

1.	Tap the Configuration Information symbol in the bottom-right corner of the Home screen.

2.	Use your finger to slide the Record ON Connect switch from Off to On.

Important Notes:

•	If Auto Reconnect is On then recording will not stop if disconnection occurs. Tap the Information symbol to open the Configuration page, then tap Advanced > Auto Reconnection to view and adjust this setting.

•	If Auto Reconnect is Off then recording will stop if disconnection occurs.

•	If the application runs out of live time when connected then recording will stop immediately after disconnection.

Record a Report without a Live Connection

Off-line interviews can be recorded for retransmission to a studio codec later or for FTP file transfers.

1.	Tap the Activity button in the top-right corner of the Home screen and then tap Record A Report.

2.	Use your finger to move the Input Slider and adjust audio input levels.

3.	Tap the Record button to start recording.

4.	Tap the Stop Recording button when you have finished recording.

record a report still recording

Managing Recorded Reports

Recorded reports can be managed by tapping the Activity button in the top-right corner of the Home screen and selecting Manage Your Reports. For more information see Managing Reports.