TieServer Console v2.0.9.x

Configure User Settings

Hide Navigation Pane

Configure User Settings

Previous topic Next topic  

Configure User Settings

Previous topic Next topic JavaScript is required for the print function Mail us feedback on this topic!  

Configuring Default User Account Settings

These connection settings will apply for all user accounts unless settings are configured individually by selecting No for Use Defaults in an individual user account.

 

1.Select Users in the main menu bar.

2.Ensure the domain is selected in the List Panel.

 

Users - list panel domain selected

3. Click change to configure the default user account settings.

 

Configuring Individual User Account Settings

1.Select Users in the main menu bar.

2.Click to select the user account you want to configure. Note: No Report-IT settings are displayed in an administrator account.

3.Click Change for Use Defaults.

4.Select No and click Change.

5.Adjust settings as required.

 

Connection Settings Explained

Following is a summary of the settings which can be adjusted globally by administrators for all users, or for individual user accounts on a case-by-case basis. The first image displays a user account and the user information which can be edited, including:

 

1.The account's email address.

2.Enabling and disabling the account.

3.Changing the account password.

4.Adding a user Tag.

 

Users - account details

The following image details the Report-IT settings available.

 

Management Console - User settings screen numbered

 

 

Setting

Purpose

1

Use Defaults

Yes: uses default user account settings; No: used to configure account settings for individual user accounts

2

Initial Audio Bitrate

Configures the initial audio bit-rate of connections when they are first dialed

3

Allow User Reneg

Enable setting to allow a user to renegotiate the connection bit-rate

4

Record On Connect

Configures Report-IT to record talent audio on the iPhone simultaneously when connected live to a studio codec

5

Share On Disconnect

If enabled, the app opens the Share Report screen automatically when a user disconnects to facilitate sharing of reports

6

Auto Reconnect

Enable setting to automatically reconnect if a connection is  lost

7

Across Networks

Enable setting to connect over Wi-Fi by default if the iPhone is registered to a Wi-Fi network, and fail over to 3G if the Wi-Fi network becomes unavailable

8

Return Channel

Enables audio monitoring of the return audio from the studio

9

Allow Mute

Turn ON to display the Mute button on the main screen of  Report-IT

10

Monitor Input

Enables audio monitoring of the iPhone mic input

11

Monitor Override

Allows users to toggle the Monitor Input function ON/OFF

12

Bluetooth Input

Turn ON to pair a Bluetooth device with Report-IT; turn OFF to avoid a device being accidentally paired with Report-IT

13

Set Own Password

Enables users to set their own login password using Report-IT

14

Remember Password

Enables users to configure Report-IT to automatically remember the log in password

15

Report Prefix

Tap to enter a new default name prefix which is applied to all recorded reports

16

Logo Byline

Use to configure a new logo into Report-IT

17

Display Logo

Allows the user to display the logo on the screen.

 

Reconfiguration of the Default Report Name

The default name given to recorded reports is "Report" and then a sequential number, e.g. Report 1 then Report 2 etc. An administrator can also enter a custom 'report prefix' for each user.

 

information2

Important Note: Enter %username% in the Default Prefix text box to add a user's login name as the default  prefix. For example, if a user's login is john@mydomain.com, and you enter %username% the default report name would be "john x". You can also add additional identifiers before or afterwards, e.g. %username% election report

 

Configure the Login Username as the Default Report Name for All Users

By configuring Default Domain Settings, Report-IT can also define the user login name as the default report name prefix for all users.

 

information2

Important Note: If the default prefix is "Report", the word displayed depends on the iPhone language setting. E.g. in French "Report" = "Reportage"